Importers often ask:
If the supplier pays for the ocean freight, who is responsible for cargo insurance?
This is particularly important when comparing:
CFR
and:
CIF.
Another common question is:
If insurance ends at the Australian port, how is the final inland delivery protected?
What Does CFR Mean?
CFR means:
Cost and Freight.
Under CFR:
• The seller delivers the goods on board the vessel
• The seller pays freight to the named destination port
• Risk transfers to the buyer once the goods are on board
• The seller has no obligation to purchase cargo insurance for the buyer
The important distinction is:
Paying Freight ≠ Bearing Cargo Risk.
How Is CIF Different?
CIF means:
Cost, Insurance and Freight.
The key difference is that the seller must also arrange insurance for the buyer's cargo risk.
In simplified terms:
CFR:
Seller pays ocean freight but does not have to arrange insurance.
CIF:
Seller pays ocean freight and arranges the required insurance.
Under both terms, cargo risk generally transfers when the goods are on board the vessel at origin.
Does CIF Provide Comprehensive Insurance?
Not automatically.
Under Incoterms® 2020, the default minimum cover for CIF generally corresponds to:
Institute Cargo Clauses (C).
This provides named-perils protection rather than broad accidental-damage coverage.
Potential covered events can include:
• Fire
• Explosion
• Grounding
• Sinking
• Capsizing
• Collision
• General Average
• Jettison
Actual protection depends on the policy.
CIF vs CIP Insurance
Incoterms® 2020 uses different default insurance standards for:
CIF
and:
CIP.
CIF retains the lower:
ICC(C)
default level.
CIP generally requires broader:
ICC(A)
or equivalent cover.
The presence of “Insurance” in the Incoterm therefore does not mean the policies are identical.
What Is Warehouse-to-Warehouse Cover?
Marine Cargo Insurance can often be arranged on a:
Warehouse-to-Warehouse
basis.
Subject to the policy, this may cover the ordinary transit through:
Origin Warehouse
↓
Origin Transport
↓
Port
↓
Ocean Freight
↓
Destination Port
↓
Inland Transport
↓
Final Warehouse.
This can reduce uncertainty about which stage of transit caused the damage.
Does CIF Insurance Always End at the Port?
No.
The insurance period depends on the:
Policy Wording.
Some CIF-arranged policies may provide broad transit coverage.
Others may have narrower limits.
Buyers should therefore request and review:
• Insurance certificate
• Policy wording
• Coverage level
• Insured value
• Start point
• End point
• Excess
The Incoterm alone does not establish the full duration of the insurance policy.
Can You Insure Only the Final Leg?
Sometimes, but it can be more complicated.
Separate:
Inland Transit Insurance
may be available depending on the insurer and cargo.
The main issue is:
When did the damage occur?
If a sealed container arrives at the customer's warehouse and the cargo is only then discovered to be damaged, it may be difficult to determine whether the loss occurred during:
Ocean Freight
or:
Australian Road Transport.
Why Can Final-Leg-Only Insurance Be Difficult?
A final-leg insurer faces the possibility of:
Pre-existing Damage.
The goods may already have been damaged before that insurer's cover began.
Depending on the risk, an insurer may therefore:
• Decline final-leg-only cover
• Require inspection
• Request a condition survey
• Apply specific exclusions
• Underwrite the shipment individually
Final-leg insurance is not necessarily impossible, but full-transit cover is often easier to manage.
How Should Insurance Be Arranged under CFR?
CFR places the cargo risk on the buyer once the goods are loaded on board.
A buyer can therefore arrange its own:
Marine Cargo Insurance
before transit begins.
Where appropriate, the buyer may seek:
Warehouse-to-Warehouse Cover
that includes:
• Origin transport
• Ocean freight
• Transshipment
• Port handling
• Australian inland delivery
Actual protection remains subject to the policy.
Why Arrange Insurance Before Shipment?
Insurance should generally be arranged before the insured risk begins.
Attempting to insure cargo after it has already departed can create issues around:
• Already-in-transit risk
• Known losses
• Existing damage
Insurance planning should therefore be part of the freight booking process.
Does CFR Give the Buyer More Insurance Control?
It can.
Because the CFR seller has no obligation to purchase insurance, the buyer can select its own:
• Insurer
• Coverage level
• ICC clauses
• Insured value
• Excess
• Transit scope
This can be useful for businesses that want greater control over their risk management.
Is CFR Always Better Than CIF?
No.
The appropriate Incoterm depends on:
• Supplier capabilities
• Buyer logistics experience
• Cargo value
• Shipping route
• Freight negotiation
• Insurance requirements
• Customs processes
There is no universally best Incoterm.
What About FOB?
Under FOB, risk also generally transfers when the goods are loaded on board the nominated vessel.
The buyer normally controls:
• Main carriage
• Cargo insurance
• Destination logistics
FOB can therefore also provide the buyer with greater control over insurance and freight arrangements.
Is EXW the Best Option?
Not automatically.
EXW gives the buyer significant logistics responsibility but can also require the buyer to coordinate:
• Origin collection
• Export-related formalities
• Inland transport
• International freight
• Insurance
Depending on the actual supply chain, FCA may sometimes fit containerised exports more appropriately.
Is CFR Suitable for Containerised Cargo?
CFR is intended for:
Sea and Inland Waterway Transport.
Where containerised cargo is handed to a carrier at a terminal before it is physically loaded onto the vessel, other rules such as:
FCA
or:
CPT
may better reflect the actual delivery arrangement in some transactions.
Incoterm selection should match the physical supply chain.
How Much Should Cargo Be Insured For?
The insured value may consider more than the invoice value.
Depending on the policy, it may include:
• Goods value
• Freight
• Insurance cost
• Other insurable transit costs
CIF arrangements commonly use at least:
Contract Price + 10%
as an insurance basis.
Actual insured value should still be confirmed under the specific insurance arrangement.
Why Does Final Inland Delivery Matter?
Cargo can still be damaged after leaving the port.
Potential inland risks include:
• Truck collision
• Vehicle overturning
• Cargo shifting
• Container damage
• Forklift damage
• Theft
• Loading and unloading incidents
High-value, fragile and machinery cargo can remain exposed throughout the final delivery.
What If Damage Is Found Only After Opening the Container?
A sealed container may move from:
Origin
to:
Australian Warehouse
before being opened.
If cargo is then found damaged, potential causes may include:
• Origin packing
• Lashing
• Heavy weather
• Port handling
• Road transport
This illustrates why splitting the insurance between different transit legs can create difficult loss-allocation questions.
What Should You Do If Cargo Is Damaged?
At delivery:
• Take photographs
• Inspect the container
• Check the seal
• Keep delivery records
• Note damage on the POD
• Notify the freight forwarder
• Notify the carrier
• Notify the insurer
Avoid signing a clean delivery receipt where visible damage is present.
When Is a Survey Required?
For larger or complex losses, the insurer may appoint a:
Marine Surveyor
or:
Loss Adjuster.
They may review:
• Cargo condition
• Packing
• Container condition
• Cause of damage
• Repair cost
• Salvage value
Damaged goods should generally not be disposed of before insurers have had an opportunity to inspect them unless safety or legal requirements require otherwise.
What About General Average under CFR?
Under CFR, the buyer is already at risk after the goods are loaded on board.
If:
General Average
is declared during the voyage, the cargo owner may have to provide security and contribute to qualifying losses and expenses.
Appropriate cargo insurance can normally assist with insured General Average obligations.
Without insurance, the cargo owner may need to fund those obligations directly.
Do Incoterms Determine Ownership?
No.
Incoterms mainly allocate:
• Obligations
• Costs
• Risk
They do not determine when legal ownership or title transfers between seller and buyer.
Ownership is governed by the sale contract and applicable law.
How Can Businesses Avoid Insurance Gaps?
Before shipment, confirm:
• Incoterm
• Risk-transfer point
• Who arranges insurance
• Coverage level
• Coverage start
• Coverage end
• Final inland delivery
• Insured value
• Excess
• Exclusions
• General Average cover
The freight plan and insurance plan should ideally be confirmed together.
What Should CIF Buyers Ask Their Supplier?
Request details including:
• Insurance company
• Insurance certificate
• ICC(A/B/C) or other coverage
• Insured value
• Start point
• End point
• Australian inland-delivery coverage
• Excess
• Claims contact
“Insurance Included” alone does not explain the quality or duration of the cover.
What Should CFR Buyers Do?
Before shipment:
• Confirm the risk-transfer point
• Establish cargo value
• Confirm the route
• Confirm the final delivery address
• Obtain an insurance quotation
• Consider full-transit cover
• Check General Average protection
• Retain the policy or certificate
This is generally easier than trying to add only the final delivery leg after the cargo has already travelled internationally.
Chinz Logistics International Freight
Chinz Logistics provides international freight services between China, Australia and other global markets, including:
• China to Australia sea freight
• China to Australia air freight
• LCL shipping
• FCL shipping
• China collection and warehousing
• Export customs support
• Australian import clearance coordination
• Container cartage
• Australian local delivery
• Furniture freight
• Machinery transport
• Project Cargo
For CFR, CIF, FOB and other trading terms, freight planning should consider:
Incoterm + Risk Transfer + Insurance Scope + Final Delivery
to reduce the risk of an insurance gap between the international and domestic transport legs.
If you are preparing an international shipment, provide:
Cargo description + cargo value + Incoterm + package count + packed dimensions/weight + origin + Australian destination + transport mode
to help plan the overall freight solution.



